• When Textiles Become Architecture: Studio Akane Moriyama

    11 October 2024

     

    The way Moriyama Akane uses fibres, textiles, colours and craftsmanship is inspiring. See link

    studio AM

    The roof being installed at the Japanese Pavilion at the 2023 Venice Biennale​ © Studio Akane Moriyama

    more

  • Shading structure at the Netto supermarket, Berlin

    9 October 2024

    Picture1

    Beneath the glass dome of the Netto supermarket, the aim was to improve the acoustics of the retail space and provide a visual screen for the office floors above.

    The tensioned mesh sculpture consists of a membrane that is anchored at 16 points in the circular ceiling opening. A vertical floating stainless steel strut element creates the three-dimensional wave shape. Tension can be adjusted at the anchor points and through the four steel cables connecting the membrane to the mast.

    The lowest point of the 4.50m long floating strut is at a height of 2.30m, which means that the area under the membrane can be used without any restrictions.

    The material chosen by the client, a silver grey coarse meshed fabric (with a 6% opening), allows for good lighting on the ground floor and a smooth visual barrier from above.

    Visited in 2024 - while shopping - the sculpture sits elegantly under the glass dome.

    Picture2

    Picture3

    Client: Art-Invest Real Estate Funds GmbH

    Design/ Implementation planning/ Production/ Assembly: 3dtex GmbH

    Architekten: hilligarchitekten

    Statik: Ingenieurbüro Hedler

    Membrane: Textilbau / Fi Daedler

    Material: Mehgies Valmex TF 400

    Completion: 2020

    more

  • IMS BAUHAUS® Symposium 2024

    2 October 2024

    On Saturday 28 September, several presentations at the IMS BAUHAUS® Symposium 2024 focused on the sustainability and structural safety of Tensile Surface Structures, highlighting the topics of the Tensinet Working Groups 'Sustainability and Comfort' and 'Specifications & Eurocode'.

    Ketankumar Solanki's topic was 'Learning from the Chelsea and Westminster Hospital ETFE Roof: Recycling & Aging of ETFE Foils'.

    Zehra Eryuruk presented 'Environmental Impact of Membrane Structures and their Materials'.

    And Patrick Beck highlighted the 'New membrane standard (prCEN/TS19102)'.

    Well done!

    Picture1

    Figure 1. Ketankumar Solanki's presentation on Recycling ETFE-foils

    Picture2

    Figure 2. Zehra Eryuruk’s presentation on LCA analyses.

    Picture3

    Figure 3. Patrick Beck on the TS19102.

    more

  • TS19102 Design of tensioned membrane structures

    2 October 2024

    eurocode project 1

    The TS19102 Design of tensioned membrane structures is available at

    https://genorma.com/en/standards/cen-ts-19102-2023.

    more

  • TensiNews 47 online

    19 September 2024

    TensiNews 47 is online!

    cover Tensinews 47

    For members (login) link, For non-members link

    In this TensiNews issue you will find a very detailed report written by Josep Llorens, summarizing the highlights at Textile Roofs 2024. Beside this you find fresh information about different tensile projects, such as a knitted installation in Oregon, a canopy covering a stand in Germany and about the refurbishment of the large membrane roof of Dresden station. Tensile architecture is also an ideal partner to support green façades or shading elements!

    more

  • Tensinewsflash SUMMER 2024

    28 June 2024

    Dear Member,

     

    Please find the latest TENSINEWSFLASH SUMMER 2024 including call for contributions TN47; WG activities; etc.

    Enjoy your reading as well as the summer season which promise to be interesting and busy! Link

     

    more

  • Execution rules for Membrane Structures

    13 June 2024

    WG EUROCODE

    To support the conversion of the CEN/TS 19102:2023 Design of tensioned membrane structures into a new EN Eurocode, there is a need for execution rules, to underpin the corresponding design provisions, to be included in a European Standard. Key experts in the design and construction of membrane structures are invited to contribute to the development of these execution rules. See link

    more

  • WG updates

    6 June 2024

    The TensiNet WG eurocode is involved with the writing of the “Execution of tensioned membrane structures”.Last week the draft has been discussed and updated. A next WG meeting will be held on 17.07.

     

    The Working Group Sustainability & Comfort submitted to IBU (Institut Bauen und Umwelt) the Product Category Rules Part B: Requirements on the EPD for structural membranes (fabrics, coated fabrics and foils). It was published beginning of 2024. See link.

    The next step is the writing of 2 Environmental Product Declarations (EPD): a group EPD for PVC coated polyester fabric and a group EPD for ETFE-foils. A subgroup EPD for PVC/PES and one for ETFE will be set up for this purpose. The next WG meetings are scheduled on 01.07 and 30.07.

    Interested to join a WG? Send an email to info@tensinet.com.

    more

  • TensiNet welcomes 2 new Partners!

    16 May 2024

    At the General Assembly, the Permanent Members voted unanimously in favour of Architen Landrell and Pfeifer joining the association as Partner Members!

    Architen Landrell is at the forefront of tensile architecture innovation. They specialise in structural membrane design to create landmark tensile fabric structures and iconic features. With 30 years of experience in the industry, an impressive portfolio of award-winning projects, and a growing list of over 6.000 structures in 48 countries, their track record speaks for itself.

    Architen Landrell was a partner member in the early days, supporting the emergence of Tensinet in the membrane structures industry. Over the years they have worked with TensiNet, the University of Nottingham, the University of Newcastle and, more recently, the University of Bath, to expand their knowledge and improve their practice. They are active in the Working Group Sustainability & Comfort and the Working Group Eurocode and are keen to increase their involvement in the association and to work with all other members to advance their combined knowledge.

    Pfeifer offers solutions for a wide range of applications within the construction, logistics and architecture industries. In the project business they realize innovative building envelopes, roof structures and façade constructions.

    Their expertise is based on decades of experience with cable structures, tension rod systems and membrane covers. As pioneers in the field of lightweight architecture, they can design, supply and install these structures in any material - from steel to wood to membranes, glass or other materials.From movable structures to facades, bridges or roofs, there is always an intelligent way to create a light, resource-efficient, long-lasting and low-maintenance architectural solution.

    Also, Pfeifer has been a Firm member for a long time.

    Interested to become a TensiNet Partner member? A Partner Member decides on the policies and activities of the association. A Partner Membership receives several benefits (highest visibility on the website and publications, free registrations for TensiNet Symposia, etc). If you are a committed Firm member and you would like to discuss and decide on TensiNet's tasks and mission, please send an application to become a partner member to info@tensinet.com.

    more

  • TensiNet at Textile Roofs 2024

    16 May 2024

    TR Logo Beschnitt

    TensiNet was well represented at Textile Roofs 2024, which took place from 28 to 30 April.

    Presentations and workshops took place on the ecofriendly seminar ship. See link

    more