|
10.50-12.55 Plenary session topic 1
Advanced tools for futuristic skins – ETFE
Massimo Maffeis, Antonio Diaferia, Nicola Todesco
Modeling of impacts on tensile structures
Adam Bown, Adrian Cabello, Artem Holstoi
Porto Pi shopping center's floating pergolas
Juan García-Lastra Zorrilla, Juan Rey-Rey, Alejandro Minguez
PumpItUp, gite mobile for the European cultural capital Esch-sur-Alzette 2022
Bernd Stimpfle
The integration of CAD and FEA for lightweight design and analysis
Ann-Kathrin Goldbach, Kai-Uwe Bletzinger
|
10.20-12.25 Plenary session topic 3
Lightweight ideas for a built environment beyond concrete
Katja Bernert
How lightweight architecture contribute to sustainability & decarbonization strategy?
Thomas Bonneville
6dTEX - Sustainable Composite Structures from 3D Print on 3D Textile
Claudia Lueling, Sascha Biehl, Roxana Tennert, Gözdem Dittel, Marina Chernychova, Thomas Gries
Architecture for pigs
Maxime Durka
An innovative solar shading device for outdoor thermal comfort
Adriana Angelotti, Alara Kutlu, Salvatore Viscuso, Andrea Alongi, Alessandra Zanelli
|
10.50-12.55 Plenary session topic 2
Design and execution of membrane structures acc. to CEN/TS 19102
Jörg Uhlemann, Bernd Stimpfle, Natalie Stranghöner
Determination of ULS values of ETFE membrane structures acc. to Eurocode using tensile strength measurements in quality control of production
Torsten Balster, Carl Maywald, Lazarev Delche
On the design of membrane structures with the partial safety factor concept – a parameter study on the influence of structural and probabilistic properties
Martin Fueder, Max Teichgraber, Daniel Staub, Kai-Uwe Bletzinger
Characterization of polyethylene structure membrane
Sherryl Patton
Practical application of a stress-ratio dependent adaptive material model in the structural analysis of textile structures
Jörg Uhlemann, Mehran Motevalli, Natalie Stranghöner, Daniel Balzan
|
|
14.00-16.05 Parallel session A
topic 3
Integrating sustainability aspects in the teaching of lightweight structures and their comparison with common structures
Heidrun Bögner-Balz, Sarah Von Der Weth, Karsten Moritz
The environmental performance of membrane structures
Zehra Eryuruk, Marijke Mollaert
A comparative LCA between a Textile Façade Retrofit and conventional solutions
Giulia Procaccini, Carol Monticelli
ATLAS architectural membrane as a core element for larger and energy efficient air domes
Alexandra Sonnenberg
T-shade: experimental case study conducted to reuse t-shirts as a tensile-shading system
Amirhossein Ahmadnia, Gergely Mátyás Jelinek Jelinek, Aina Radovan, Salvatore Viscuso, Alessandra Zanelli
|
13.30-15.35 Parallel session A
topic 2
Living in the 7th element: Hans-Walter Müller's pneumatics
Katja Bernert
Finite element modelling of inflatable beams up to the ultimate stability phase
Laurent Gornet, Jean-Christophe Thomas
Analytical, numerical and experimental study of inflatable panels
Paul Lacorre, Anh Le van, Rabah Bouzidi, Jean-Christophe Thomas
The calculation of large cable reinforced gas storage systems
Jürgen Holl
Textile covers of biogas storage tanks - Interaction between Membrane behavior and Operation of the Gas Membrane
Rosemarie Wagner, Kai Heinlein
|
14.00-15.40 Parallel session A
topic 3
Suntex: weaving solar energy into building skin
Rogier Houtman, Ahmed Mohamed Ahmed, Pauline van Dongen, Mariana Popescu
Integration of the Fog water harvesting system in lightweight structure design for emergency camps
Maria Giovanna Di Bitonto, Nathaly Michelle Rodriguez Torres, Alara Kutlu, Nicolò Elio Giorgietti, Alessandra Zanelli
Challenges of measuring sound absorption of ETFE membranes in a laboratory
Yannick Sluyts, Monika Rychtarikova, Christ Glorieux
Greentexx: Advanced tensile architectural membranes for active and passive cooling of the outdoor & indoor environments via vertical gardens
Benny Picke
|
|
14.00-16.05 Parallel session B
topic 2
Computational design workflow for a complex cable network
Jef Rombouts, Oriane Guidet, Ludovic Regnault, Klaas De Rycke
Development and validation of an experimental methodology for the characterization and FEM analysis of fibre-reinforced architectural meshes
Salvatore Viscuso, Carol Monticelli, Alessandra Zanelli, Alberto Fiorenzi
Parametric workflow approach in membrane design, from details to construction
Rémi Journo
Simulation of functionally graded CNC-knitted membranes
Yuliya Sinke, Martin Tamke, Mette Ramsgaard Thomsen
Testing Parameters for uniaxial short-term tensile tests of ETFE foils and their connections
Dominik Runge, jörg Uhlemann, Natalie Stranghöner
|
13.30-15.35 Parallel session B
topic 1
Affine minimal surfaces: an intuitive family of shapes for tensile architecture
Cyril Douthe, Rémi Belloc, Ken'ichi Kawaguchi
Value enhancement of the roof of the CC Le Polygone Montpellier
Fabián Ascaso, Beatriz Arnaiz, Ramon Julián, Feike Reitsma
Optimisation of tensegrity systems with tensioned fabrics
Fevzi Dansik, Meltem Sahin, Caglar Samat
Retractable membrane roofs as urban shading device
Liu Dongyuan, Gregor Grünkorna, Julian Lienhard, Ata Chokhachian, Thomas Auer
Use of Parametric Design in Design to Production Process of a Membrane Facade
Milan Dragoljevic, Roberto Canobbio
|
14.00-15.40 Parallel session B
topic 1
Corolla, the soft-robotic coworking pod
Paolo Beccarelli, Ofir Albag, Martin Huba, Roberto Maffei
The Wave Pavilion from 2014 to 2023: origins, realization and reuse
Mathieu Lemunier
TensyDome: A pavilion combining tensegrity ring and tensile architecture
Nicolas Pauli
Beyond bending: tension. Membrane structures 1
Josep Ignasi de Llorens Duran
|
|
16.25-17.15 Parallel session A
topic 1
Swatch Omega Headquaters - Multifunctional ETFE-modules in the building envelope
Karsten MORITZ, Koffi Alate
Temporary structure Grand Palais Éphémère
Patrick Vaillant, Beatriz Arnaiz, Feike Reitsma
|
16.00-17.00 Keynote lecture
Textile Architecture with or versus today challenges in built environment
Rosemarie Wagner
|
16.00-17.30 Working Group Sustainability & Comfort Meeting with invited guest Bruce Danziger |
