Landing Craft Tank (LCT) canopy, D-Day Museum
The D-Day Story, Clarence Esplanade, Southsea, Portsmouth, Hampshire, PO5 3NT
Year of construction
Name of the client/building owner
National Museum of the Royal Navy, The D-Day Story with backing from the National Lottery Heritage Fund
Function of building
Degree of enclosure
Temperate - cold winters and mild summers
Number of layers
Type of application of the membrane
Primary function of the tensile structure
- Rain protection
- Sun protection
Architen Landrell were approached by Pritchard Architecture on a nationally significant project to relocate the last remaining Landing Craft Tank (LCT) from the D-Day landings to the D-Day Museum, Southsea. After the original singly ply roof with a timber soffit proved too expensive, the design team came to talk to Architen Landrell about designing a tensile fabric canopy to go over the ship, supported by a large, curved, cantilevered steel structure.
Key to the design intent was a slender, curved leading edge, flush white underside and grey top side. Architen Landrell worked with all the key stake holders including the National Museum of the Royal Navy and local authority to meet these design demands.
The desired clean lines were achieved by locating the tensile fabric membrane on the underside of the steelwork. This hid all of the structure above but posed a challenge for the drainage of rainwater. The specialist tensile fabric design and engineering team developed a clever hopper detail around the posts to drain water effectively and ensure no leaks.
PVC coated polyester was an obvious choice due to the fact that it is available in a range of colours, offers a long lifespan, easy maintenance and also met the client’s tight budget. Further discussions determined that a blackout fabric would be preferable thus allowing the opportunity to project film or light on to the canopy in the future. Due to the strict planning restraints Architen Landrell had to find a blackout fabric with white underside and a specific grey upper which led them to SATTLER’s POLYPLAN Tent Manege 671 Dual Colour Type II.
Description of the environmental conditions
Material of the cover
Polyplan Tent Manege 671 Dual Colour Type II
PVDF SATLER PRO-TEX
Main dimensions and form
Covered surface (m2)
Duration of use
Temporary or permanent structure
Artura Design and Engineering Ltd
Sattler PRO-TEX GmbH