• external
  • external
  • external
  • external

General information

  • Home page
    https://www.mehler-texnologies.com/en/casestudies/arthouse/
  • Location address
    Düsseldorf
  • Location country
    Germany
  • Year of construction
    2015
  • Short description of the replacement or dismantling
    The printed TF400 façade encases the single family home and is uniquely eye-catching
  • Function of building
    Houses
  • Degree of enclosure
    Open structure
  • Climatic zone
    Temperate - cold winters and mild summers
  • Number of layers
    mono-layer
  • Type of application of the membrane
    attached
  • Primary function of the tensile structure
    • Space defining elements

Description

The well-known 3D artist Tim Berresheim from Cologne developed a covering for the single family home in cooperation with the Niggemeyer printing company. In comparison to the surrounding houses, it goes without saying that this is a uniquely eye-catching façade.
The design was printed on the Mehler Texnologies VALMEX® TF 400 mesh, after the colours and set up were first digitally tested.
At the client’s request, it was printed with a resolution of up to 800 dpi.
A total of more than 600 m² were printed out and installed. Horizontal supports on the upper and lower ends of the material enable the membrane to withstand strong wind gusts. The flame-retardant material can withstand temperatures between -20 and +70 °C.

Description of the environmental conditions

Material of the cover

  • Cable-net/Fabric/Hybrid/Foil
    Fabric
  • Material Fabric/Foil
    Polyester
  • Material coating
    PVC

Main dimensions and form

  • Covered surface (m2)
    600
  • Form single element
    Flat appearance
  • Form entire structure
    Flat appearance

Duration of use

  • Temporary or permanent structure
    Permanent
  • Design lifespan in years
    21-30

Involved companies

Editor